How to Make a Tie Blanket Car Seat Cover
This content contains affiliate links or sponsored elements, read our Disclosure Policy.
Oh yes my non-sewing friends it is possible! You too can make a cute baby car seat cover, without having to sew a stitch! Please note that there are two versions of the no sew baby car seat canopy pattern.
You will need the following:
A printed out version of the Free Fleece Fun Baby Car Seat Canopy PDF.
1 and 1/3 yards fleece
2/3 yard of 2.5 inch ribbon (or wider)
4 inches Iron On Velcro
Fusible interfacing
Washable cloth marking pen or pencil
Scissors
Iron
Hot Glue gun
extra buttons, ribbon for decorating
Download the free pattern here, tutorial below.
You can get a free copy of Adobe reader here. By downloading you are agreeing to pattern terms of use. Click the picture of the pattern envelope to download the .pdf !
No Sew Baby Car Seat Canopy tent how to
1 – Cut out Pattern
Assemble the pattern. You can find assembly directions on this page. Please note there are two versions of this pattern. There is a picture in the download as a reference guide.
2 – Cut out the pattern pieces
Placing the line on the fold pin and cut out the pattern.
Then trim off the "fringe zone" section of the pattern and pin back onto cloth as pictured below.
3 – Mark the fringe "cut to" line
Tracing the pattern draw a line all the way around it. This is your reference line.
One the wrong side of the cloth mark the four corners of where the interfacing will go and the slits will go on each side.
If you want you can skip this step and just leave the pattern on the cloth and go to step four.
4 – Cut the Fringe
Cutting to the line or outside of the pattern, snip the fringe. I like it between a half-inch and an inch wide between cuts. It doesn't have to be perfect, just try to keep the cuts straight. Snip all the way around the pattern.
5 – Add the interfacing
Using the guides you marked, on the wrong side of the fabric iron on the interfacing. (I know you're tempted to skip this step, but it's really important to reinforce the fleece so it doesn't stretch out, especially since you're not putting any stitches in to the fabric.)
Tip: The placement of these are approximate, all baby car seats are different. If you have access to the car seat you are making this for I suggest you sit the fabric on it to get the placement just right.
6 – Tie the fringe
I like to do this while watching a movie. Tie each individual strand in a half knot. Go all the way around the blanket.
You will notice that the edge gathers a little – it's supposed to. It helps fit a little more snugly on the car seat.
7 – Make the straps
Cut two strands of ribbon into 10 inch lengths. Finish the ends with a lighter. Turn over each end 1 inch once and then 1 inch again (folding in toward the wrong side of the ribbon.
Note: I used wire ribbon and it worked great!
8 – Add the Velcro
Iron on the hook side to the wrong side of the ribbon. Place it over where you turned under the ribbon so it will hold down the fold. Iron on using a press cloth to protect the ribbon.
Place the loop on the right side of the ribbon and iron on using a press cloth. You should now be able make a circle when you attach the Velcro.
9 – Finishing up
Using a hot glue gun secure the other end of the ribbon that you folded in. Glue on any accessories you would like to add to the front of the straps (on the right side of the ribbon) – I like buttons and ribbon.Tutorial here.
Cut the slits in the fleece that you marked.
Slits should only be half and inch wide – the ribbon will scrunch and the fleece will stretch. A small slit is better in this case.
Thread the straps through and put on the car seat. The pattern is designed to envelope over the baby – you can tie the fringe on each side together so there aren't any gaps on the side.Note: If you don't want to tie the sides together, you could also use some iron on Velcro.
You could easily make this a double layered cover (great for cold climates) and just tie the two layers together, and thread the straps through both.
More Free Baby Car Seat Canopy Patterns:
- Stretchy Baby Car Seat Cover
- Fleece Baby Car Seat Tent (perfect for cold weather)
- Simple Fleece Baby Car Seat Cover
- Baby Car Seat Cover with Window
Additional Free Baby Patterns:
- Baby Long Sleeved T-shirt
- Baby Sundress Pattern
- Baby Bib with a Pocket
- Monster Mash Up Softie Toy
- Baby Burp cloth Pattern
- Busy Baby Tag Blanket
- Fleece Vest
Sweet! I just sent you can email!
Reader Interactions
How to Make a Tie Blanket Car Seat Cover
Source: https://www.fleecefun.com/no-sew-baby-car-seat-canopy-tent-how-to/